Mid-Laser

MID-LASER is one of the most flexible and professional laser systems on the market.

MID-LASER It consists of a table unit (base unit) to which different laser handsets (laser probes) are connected. The base unit controls the system's drift function while treatment is performed with the laser handset. MID-LASER has an inbuilt lithium ion-battery which means it can be used without an electric source, but it is primarily intended to be used connected to an electric mains outlet.

FUNCTIONS and ATTRIBUTES

MID-LASER has four control buttons which are used to control the laser energy input when treating superficial to deep-lying problems (e.g. skin/sores, tendons or joints and muscles). A signal indicates when it is time to move the laser handset to a new treatment point. These control buttons have been developed in order to simplify treatment of different types of problems, irrespective of whatever laser or handset is used. There are also control buttons to regulate energy output, frequency, number of joules used and time in seconds, for every treatment point.

Built-in output indicator

The laser`s strength/output effect can be measured in order to control it is working as programmed. The measured parameters are shown on a display.

Double displays and control panels

Laser settings can be set individually for each connected laser handset. Using both displays, it is simple to keep journals stating what has been used in treatment, as well as wavelengths, energy effect, time and joule.

Joule setting

Adjustable amounts of laser energy measured in joules between every given signal can make a specific dosage per application possible.

Automatic laser stop

Every ten minutes the laser light stops automatically and a signal is heard.

DOUBLE LASER SOCKETS

Two similar or different laser handsets can be used simultaneously to shorten the treatment time or to treat more flexibly.

Time setting

The time control can be set for minutes and/or seconds between every signal, making it possible to adapt the dosage to a certain kind of treatment.

Adjustable output effects

The output effect of the laser diodes can be changed from lower to higher. This applies to all models except 904 where time has to be regulated instead. This function works well for someone who wants to regulate energy effect or dosage for a certain type of treatment.

Flexible and inter-changeable

MID-LASER is even well-suited for someone who wants to start on a smaller scale with one laser handset, but at the same time has the possibility to procure more in the future.

Technical specifications

Select a component to see its specifications.

Base unit:
Superpulsed lasers:
Powerpulsed lasers
Base unit
length
248 mm
width
148 mm
height
45 mm
weight
1,4 kg
battery type
Lithium-ion
typical battery time
2,5 hour treatment time
Art.no.
Base Unit 2.5
Superpulsed laser: 12 x 904 nm
wave length
904 nm
laser type
Infrared, GaAs
NO. OF LASER DIODES
12 x 904 nm
OUTPUT POWER
(TOTAL OUTPUT POWER)
12 x 60 mW (720 mW)
PEAK POWER
12 x 20 000 mW
BEAM SHAPE
Divergent
ART.No.
904-12
SUPERPULSeD LASER: 4 X 904 NM
wave length
904 nm
laser type
Infrared, GaAs
NO. OF LASER DIODES
4 x 904 nm
OUTPUT POWER
(TOTAL OUTPUT POWER)
4 x 60 mW (240 mW)
PEAK POWER
4 x 20 000 mW
BEAM SHAPE
Divergent
Art.no.
904-4
SUPERPULSeD LASER: 1 X 904 NM
wave length
904 nm
laser type
Infrared, GaAs
NO. OF LASER DIODES
1 x 904 nm
OUTPUT POWER
(TOTAL OUTPUT POWER)
1 x 60 mW (60 mW)
PEAK POWER
1 x 20 000 mW
BEAM SHAPE
Divergent
Art.no.
904-1
PowerPULSeD LASER: 1 X 808 NM
wave length
808 nm
laser type
Infrared, GaAlAs
NO. OF LASER DIODES
1 x 808 nm
OUTPUT POWER
(TOTAL OUTPUT POWER)
1 x 500 mW (80, 150, 300, 500 mW)
PEAK POWER
1 x 1 400 mW
BEAM SHAPE
Divergent
Art.no.
808-1
POWERPULSeD LASER: 1 X 660 NM
wave length
660 nm
laser type
Visible red, GaAlInp
no. of laser diodes
1 x 660 nm
output power
(total output power)
1 x 100 mW (25, 50, 75, 100 mW)
peak power
1 x 120 mW
beam shape
Divergent
Art.no.
660-1
POWERPULSeD LASER: 1 X 520 NM
wave length
520 nm
laser type
Visible green, InGaN
NO. OF LASER DIODES
1 x 520 nm
OUTPUT POWER
(TOTAL OUTPUT POWER)
1 x 100 mW (25, 50, 75, 100 mW)
PEAK POWER
1 x 150 mW
BEAM SHAPE
Divergent
Art.no.
520-1
POWERPULSeD LASER: 1 X 450 NM
wave length
450 nm
laser type
Visible blue, InGaN
NO. OF LASER DIODES
1 x 450 nm
OUTPUT POWER
(TOTAL OUTPUT POWER)
1 x 100 mW (25, 50, 75,100 mW)
PEAK POWER
1 x 800 mW
BEAM SHAPE
Divergent
Art.no.
450-1